Screwed together from steel pipe, Made in Germany

Pipe furniture from urb.style is screwed together from black steel pipe and malleable iron fittings, Made in Germany. The range includes clothes stands, clothes rails for wall and ceiling, shelves, shoe racks and coat racks, holding between 30 and 120 kg depending on the model. To build your own pipe furniture, you can also buy all the parts individually.

Ratgeber und Anleitungen

Alle Beiträge im Magazin

Steel pipe and fittings · Made in Germany

What is pipe furniture and what are its advantages?

Pipe furniture is made from pipes and connectors that you screw together, without welding. On almost all urb.style models, that means black steel pipe with a 26.9 mm diameter, in 3/4 inch. Corners, branches and feet are malleable iron fittings. Production takes place in Germany.

This modular system gives you clothes stands, wall coat racks, shelves and shoe racks. Where there is no room for wardrobes, an open frame takes over their job. The material is robust, and because every pipe is simply screwed in, the construction can be taken apart, rebuilt or extended by a section. Wood comes in where something needs to lie flat: as an oak shelf or a coloured wooden board.

Loft with a brick wall and furniture made of black steel pipe
Made in Germany
all frames, manufactured in Germany
30–120 kg
load capacity depending on the model
318 cm
widest frame: MAX, FRANZ, SVEN, THEO
26.9 mm
pipe diameter at 3/4 inch

What kinds of pipe furniture are there?

The range is split into eight families, sorted by mounting and purpose. Each one leads to its own category with all dimensions.

Freestanding clothes stand MIA made of black steel pipe
01

Freestanding clothes stands

67–318 wide · 125–224 high · 51–52 deep (cm)

The largest group: twelve frames on their own feet, from the slim single-rail MIA to the three-section MAX. ANDRE is built as a walk-in wardrobe. According to the description, a standard chest of drawers fits in between.

Freestanding Single rail Two rails Three rails
Wall-mounted clothes rail XAVER with two sections
02

Wall-mounted clothes rails

94–318 wide · 195–215 high · 36–40 deep (cm)

The feet of SVEN, XAVER, CHARLIE, LEA and THEO stand on the floor, while flanges at the top hold the frame to the wall. That way they project only 36 to 40 cm into the room, around 12 to 16 cm less than a freestanding frame. SVEN and THEO have three hanging sections and hold 120 and 100 kg respectively.

On the wall
Ceiling clothes rail ARVID made of black steel pipe
03

Suspended from the ceiling

82–112 wide · drop 65–105 (cm)

ARVID is screwed to the ceiling and hangs down on vertical pipes. Under a sloping ceiling or in front of a window, where there is no room on the wall, the floor stays clear. The product page states a load capacity of up to 40 kg, depending on the ceiling.

View ARVIDCeiling mounting
Clothes stand LEVI on wheels with shoe shelf
04

On wheels

87–107 wide · 165–185 high · 42 deep (cm)

LEO and LEVI run on castors with a locking brake. In a shop, you can push the goods into the shop window. At home, you roll the frame aside for cleaning. LEVI has a shelf at the bottom for shoes or boxes. Both hold 80 kg.

View LEOView LEVI
Wall frame QUINCY with a wooden shelf section between two hanging sections
05

Shelves made of pipe and wood

34–290 wide · 57–224 high · 20–52 deep (cm)

Seven models combine a clothes rail with shelves and create storage for folded items, from SILLY with one board to QUINCY with its own shelf section. The wall shelves KARL, WILLY and HUGO do without a rail entirely. At 34 to 42 cm wide, HUGO is the size for kitchen and bathroom, built with 1/2-inch fittings instead of 3/4.

With clothes rail All shelves
Shoe rack BODO made of steel pipe with two wooden shelves
06

Shoe racks

80 wide · up to 34.5 deep (cm)

BODO and BRUNO are meant for shoes only: 80 cm wide, with wooden shelves, holding up to 40 kg. If you want shoes and jackets in one place, take ARON, ELLEN or LEVI: there the shoe shelf sits below the rail.

Shoe racks
Single-leg wall coat rack OTTO made of steel pipe in the hallway
07

Hallway coat racks

70–100 wide · 24–65 deep (cm)

In the entrance, a pipe on the wall is often enough. OTTO is a single-leg wall coat rack in four depths from 35 to 65 cm. JONAH is a short wall rail for jackets, also handy in the kitchen: with S-hooks, pots hang from it. On NINA and NINO, an oak shelf above the rail holds hats and scarves.

Coat rails
Malleable iron fittings and steel pipe as individual parts
08

Individual parts for building furniture

3/4 inch

The fittings are also available individually, all in 3/4 inch: tee, elbow, cross, socket, flange, cap and a swivel castor with reducing nipple. You can get the matching pipe in the length you want. Boards, baskets, hangers and S-hooks complete the frame.

Individual parts Accessories

A winter coat takes up about 8 cm on the rail, a shirt on a hanger around 3 cm.

Guideline for planning the rail width.

How sturdy is steel pipe furniture?

On every model, the steel frame carries the load. Its stability is shown by the load capacity listed with every product. MAX, FRANZ, ARON, ANDRE and BenWood manage 120 kg on their own feet, SVEN, XAVER, CHARLIE and QUINCY on the wall. Most of the other clothes rails are at 80 or 100 kg.

Below that are the small pieces: ARVID, JONAH, OTTO and the shoe racks with 40 kg, HUGO with 35, SILLY and WILLY with 30 kg. For wall and ceiling models, the surface you fix them to also matters.

What sizes are possible?

Widths range from 34 cm (HUGO) to 318 cm. The shop offers most models in three to five fixed widths and heights. OTTO comes in eleven heights between 107 and 207 cm.

Freestanding frames without wheels are 51 to 52 cm deep, the wall-mounted clothes rails 36 to 40 cm. As a walk-in wardrobe, ANDRE needs 120 to 140 cm of depth.

How does the industrial look work in a room?

The design follows from the construction. Straight pipes and the visible round fittings recall industrial pipework in an old basement. In front of brick, concrete or a light plastered wall in the bedroom, the black frame stands out as a simple line.

An oak shelf makes it warmer. If you already own industrial furniture in metal and wood, simply place a pipe frame next to it. Because the clothes hang in the open, matching hangers make it look calmer.

Water pipe, steel pipe, threaded pipe?

They usually mean the same component: threaded steel pipes, as known from plumbing and heating. That is why many people talk about water pipe furniture.

What matters for you is the inch size, because only the same sizes fit together. Parts in 1/2 inch, as on HUGO, cannot be screwed to 3/4 inch without a reducer.

Pipe furniture as a coat rack

In the hallway, depth matters more than width. JONAH needs only 24 cm, NINA and NINO 40 cm including the hat shelf. If you leave shoes in the entrance, add BODO or choose ELLEN: bags hang on side pipes, and the shoes stand on two bars at the bottom.

If a freestanding frame stands in a household with children, secure it additionally, as described in the guide how to stop it tipping over.

Custom pipe furniture: choose your size, rebuild later

You choose the height and width from the model’s options when you buy. If none of them fits your alcove, a pipe in the length you want replaces the standard pipe. That way you adapt the frame to your space. For special sizes of ARVID, the product page points directly to an enquiry via the contact page.

Even after assembly, the frame stays open to changes. With more fittings and pipes, you can add a second rail or an extra section.

Pipe furniture for businesses: boutique, showroom, office

Several product descriptions explicitly mention the boutique, and LEO’s also mentions the store. In a shop, what counts is that the goods hang where they are easy to see and that the frame can be moved quickly. The models on wheels suit promotional areas, SVEN or THEO with three sections suit the wall behind the till.

You can build coat racks for staff and visitors in the office from the same models. If you are planning several identical frames, send the dimensions and quantity to our service team in advance via the contact page. The guide on shop fittings with pipe systems collects ideas for the space.

How do you build a piece of pipe furniture yourself?

If you want to make a shelf or a clothes stand yourself, start with a sketch of the outer dimensions. Mark every point where two or more pipes meet and write the matching part next to it: elbow for corners, tee for branches, cross for crossings, flange for feet or wall. That gives you the shopping list for the individual parts.

Assembly is straightforward: you turn the pipes into the fittings by hand. Rectangles need a trick. Because all threads are right-hand threads, the last pipe of a closed frame can no longer be screwed in. For that there are fittings with a grub screw. These fittings slide onto a piece of pipe without a thread and are tightened with an Allen key. The guide to a DIY clothes rail made of pipes shows what this looks like in practice.

Which pipes, pipe connectors and tools do you need?

You can order the pipe as made-to-measure pipe, in any length between 3 and 120 cm, cut to size and with a male thread on one or both ends. That means no sawing or thread cutting. For the pipe connectors in the individual parts, you choose between female and male threads, for example the elbow F/F or F/M, plus 45° bends, socket, hex nipple and union.

To screw in steel pipes, gloves and a pipe wrench for the final tightening are enough. For the wall, add a drill, wall plugs and screws, and an Allen key for grub screws.

How do you calculate dimensions and pipe lengths?

The pipes alone never add up to the outer dimension, because there is a fitting at every joint. So work backwards: from the outer dimension you want, subtract the fittings at both ends. Then add the piece of pipe that disappears into the fitting on each side. How much that is depends on the fitting. If you are unsure, send your sketch via the contact page before ordering.

All models at a glance: dimensions, load capacity, prices

The table groups the models by type. It reads width, height, load capacity and price directly from the products. The depth comes from the dimension details.

TypeModelsWidth (cm)Height (cm)Depth (cm)Load capacityfrom
Freestanding MARTHA, BEN, MIA, LIA, ANNE, MAX, FRANZ, ARON, ELLEN, ELISA, ZOE, ANDRE 67–318 125–224 51–52, ANDRE 120–140 80–120 kg €104,90
Wall SVEN, XAVER, CHARLIE, LEA, THEO 94–318 195–215 36–40 100–120 kg €124,90
Ceiling (drop) ARVID 82–112 65–105 – 40 kg €46,80
Castors LEO, LEVI 87–107 165–185 42 80 kg €154,00
Shelf with rail FRIDA, SILLY, SVENJA, QUINCY, BenWood, SUSAN, LAYLA 80–290 193–224 30–52 30–120 kg €69,90
Wall shelf KARL, WILLY, HUGO 34–80 57–184 20–34.5 30–100 kg €69,90
Shoe rack BODO, BRUNO 80 65 up to 34.5 40 kg €149,90
Hallway coat rack JONAH, OTTO, NINA, NINO 35–100 107–215 24–65 40–100 kg €39,90

Assembling the ready-made models

Most models come with fabric gloves and a cloth for cleaning the metal in the package. The assembly instructions arrive by email. Every wall flange has three screw holes, and each one takes a screw with a wall plug. All instructions are collected under assembly instructions.

Buying pipe furniture online: delivery and returns

Within Germany, your package arrives in 2–5 working days. We ship free of charge within Germany from an order value of €75. Shipping costs for other countries are shown at checkout. You can send items back within 60 days. You can pay with PayPal, Klarna, credit card, Apple Pay and Google Pay.

Questions about pipe furniture

How much weight can pipe furniture hold?

Every model lists it as its load capacity. The range goes from 30 kg for the small wall shelves to 120 kg for MAX, FRANZ, SVEN or QUINCY. If lots of winter coats hang on one rail, choose a model with 100 or 120 kg.

Can I take the frames apart when I move?

Yes. All joints are screwed, nothing is welded or glued. You unscrew the pipes from the fittings and put everything back together in your new home, using new wall plugs for wall models.

Do the individual parts fit my ready-made clothes rail?

Yes, as long as both are 3/4 inch. That applies to almost all models in the shop. Only HUGO is built with 1/2-inch fittings. You’ll find pipes and connectors in the individual parts.

Are custom sizes available?

First you choose from the model’s heights and widths. For sizes in between, there is made-to-measure pipe, accurate to the centimetre between 3 and 120 cm. If neither works, send your dimensions via the contact page.

What else can I use pipe furniture for besides clothes?

According to its description, HUGO holds spices in the kitchen or towels in the bathroom. On JONAH, pots and pans hang from S-hooks. On the KARL and WILLY wall shelves, you can store whatever does not fit on a hanger.

From the magazine

Categories